Effect on photovoltaic performance of solar panels
[ X ]
Tarih
2020
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Altınbaş Üniversitesi / Lisansüstü Eğitim Enstitüsü
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
Photovoltaic (PV) cells energy production limitation leads to make it important to operate those
panels in the best operating conditions. In addition, less sunlight and higher cell temperatures are
variables that adversely affect power generation. The potential reduction of cell temperature by
one of the alternative thermal control techniques, phase change material (PCM) installation is
discussed in this thesis. Three types of PCM (RT15, RT35, and SP25E2) are used together in the
proposed system to overcome wide temperature range, in such method to reduce the PV panel
temperature. The proposed scheme is simulated using MATLAB. Simulation results show that
the effect of high temperature PCM is the overall effect. The use of PCM is disadvantage when
the temperature is lower than the PCM melting point. This disadvantage is that the temperature
of the panel increases more than the ambient temperature. At the temperatures which were higher
than the PCM melting point, the results showed a good effect on decreasing the temperature of
the panel and thus increasing the voltage and the maximum power point at peak hours.
Açıklama
Anahtar Kelimeler
Sunlight, Cell Temperature, Phase-Change-Materials, Photovoltaic
Kaynak
WoS Q Değeri
Scopus Q Değeri
Cilt
Sayı
Künye
Ali, Mena Muaad Ali. (2020). Effect on photovoltaic performance of solar panels. (Yayınlanmamış yüksek lisans tezi). Altınbaş Üniversitesi, Lisansüstü Eğitim Enstitüsü, İstanbul.
