Study and design of an immersion-cooling system for a computer using numerical and experimental analysis
[ X ]
Tarih
2023
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Altınbaş Üniversitesi / Lisansüstü Eğitim Enstitüsü
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
Computer systems may be able to use electricity more effectively if cooling electronics
systems is done more properly. Computer and some other electronic device could be cooled
via immersion-cooling by immersing them in a thermally conductive liquid or coolant. In
this study, a unique forced flow and heat sinks cooling system and technique for a singlephase immersed cooling system are presented. The CPU surface is covered with a straight
fin heat-sink, and whole mainboard is immersed in 3M Novec 7100, a designed fluid that
can disperse heat is utilised while utilizing immersed cooling. A simulation model created
utilizing the ANSYS Multiphysics programme is validated by an experimental test. To
investigate consequences of a single-phase immersed cooling system's cooling, three liquid
coolant circulating speeds and two distinct heat sink material are utilized. utilizing a crosssectional view and then a 3D isothermal surface model, the heat the model's chosen
distribution was examined with different liquid coolants and material flow rates. The
simulation results demonstrate that a cooler CPU would operate at a lower temperature if
the liquid coolant moved more quickly. However, because of the slower circulation speed,
the coolant flow was impeded. Additionally, it contributed to the uneven distribution of heat
and higher temperature levels. The greatest temperature was recorded, and it was found that
the model's imbalanced heat transmission. It should be noted that results are not
considerably impacted by the heat sink's material. The system designer can utilize the results to boost power densify and ensure the secure operation of an associated computer and
electronicdevices.
Açıklama
Anahtar Kelimeler
Comsul, ANSYS, Immersion-Cooling System, Computer, Heat Sing
Kaynak
WoS Q Değeri
Scopus Q Değeri
Cilt
Sayı
Künye
Zaidan, A. A. Z. (2023). Study and design of an immersion-cooling system for a computer using numerical and experimental analysis.(Yayınlanmamış yüksek lisans tezi). Altınbaş Üniversitesi, Lisansüstü Eğitim Enstitüsü, İstanbul.
