Design and fabrication of UWB microstrip Antenna on different substrates for wireless Communication system
[ X ]
Tarih
2022
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Institute of Electrical and Electronics Engineers Inc.
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
A new shape of microstrip antenna is proposed that operates in the 5G Sub band with size 26times 30times 1-6)mm3 ' and the effect of changing the suberate on the performance of the antenna was Investigated; the antenna is Installed using the Roger 8850 Substrata with relative dielectric Constant in_mathrmr=2,2 and loss tangent tan partial=0.009 The Effect of Changing the Substrate t_0in_r=4.3, in_r=6,15) is studied, it is found that these substrates affect the return loss (S11), gain, and group delay. It is found that in_r=2,2 provides better return loss and group delay, whereas the Substrate with in r=6,15 gives better gain; therefore, the Substrate selection depends on the required performance factor. The antennas were fabricated using Rogers Substrata with a relative dielectric constant of in_r=2,2 and tested using the Vector Network Analyzer; it was found that the Simulation and experimental results are in reasonable agreement.
Açıklama
Anahtar Kelimeler
5G, Gain, Group Delay, SWR, VNA
Kaynak
HORA 2022 - 4th International Congress on Human-Computer Interaction, Optimization and Robotic Applications, Proceedings
WoS Q Değeri
Scopus Q Değeri
N/A
Cilt
Sayı
Künye
Ahmed, O., Thaher, R. H., Ahmed, S. R. (2022). Design and fabrication of UWB microstrip Antenna on different substrates for wireless Communication system. In 2022 International Congress on Human-Computer Interaction, Optimization and Robotic Applications (HORA), IEEE.
