Effect of reinforcing materials on mechanical properties of composite material using Taguchi method
Yükleniyor...
Tarih
2021
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Journal of Physics: Conference Series
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
The mechanical properties play an important role in the selection of suitable
material in the manufacturing of boats. In this paper, the effect of glass fiber orientations and the
fillers weight fraction on the mechanical properties of un saturated polyester composite material
were studied. The glass fibers were used with (0/0, 0/90, 45/45) angles. The carbon filler used with
(2.5%, 5%, 7.5%), while the aluminium oxide nano be used with (0%, 1%, 3%) weight fraction
respectively. The standard Taguchi’s array L9 (33
) was used. The signal to noise ratio and analysis
of variance were introduced to analyze and estimate the optimal combination parameters. The
results show that the mechanical properties improved with using the reinforcements. The glass
fibers orientations angle presents the most parameter effect than the other parameters on the
modulus of elasticity, tensile strength and impact strength with a contribution of 81.8%, 83.39%
and 96.75% respectively. Followed by carbon and aluminium oxide nano. The optimum parameter
with their levels for the highest modulus of elasticity was obtained at (0/90 fiber orientation, 5%
carbon and 0% nano aluminium oxide). While the highest tensile strength and impact strength
present with using (0/0 fiber orientation and 5% carbon). The experimental and expected results are
very close, with an error ratio not exceeding 5%.
Açıklama
Anahtar Kelimeler
Taguchi Method, Reinforcing
Kaynak
IOP Publishing
WoS Q Değeri
Scopus Q Değeri
N/A
Cilt
Sayı
Künye
Owaid, A. A., Kaygusuz, H., & Mohammed, F. M. (2021, August). Effect of reinforcing materials on mechanical properties of composite material using Taguchi method. In Journal of Physics: Conference Series (Vol. 1973, No. 1, p. 012246). IOP Publishing.
