Effect of reinforcing materials on mechanical properties of composite material using Taguchi method

Basit Öğe Kaydı
dc.authorid0000-0001-9336-1902en_US
dc.contributor.authorOwaid, Anmar Abdulazeez
dc.contributor.authorKaygusuz, Hakan
dc.contributor.authorMohammed, Farag Mahel
dc.date.accessioned2022-01-20T12:53:12Z
dc.date.available2022-01-20T12:53:12Z
dc.date.issued2021en_US
dc.departmentFakülteler, Mühendislik ve Doğa Bilimleri Fakültesi, Makine Mühendisliği Bölümüen_US
dc.description.abstractThe mechanical properties play an important role in the selection of suitable material in the manufacturing of boats. In this paper, the effect of glass fiber orientations and the fillers weight fraction on the mechanical properties of un saturated polyester composite material were studied. The glass fibers were used with (0/0, 0/90, 45/45) angles. The carbon filler used with (2.5%, 5%, 7.5%), while the aluminium oxide nano be used with (0%, 1%, 3%) weight fraction respectively. The standard Taguchi’s array L9 (33 ) was used. The signal to noise ratio and analysis of variance were introduced to analyze and estimate the optimal combination parameters. The results show that the mechanical properties improved with using the reinforcements. The glass fibers orientations angle presents the most parameter effect than the other parameters on the modulus of elasticity, tensile strength and impact strength with a contribution of 81.8%, 83.39% and 96.75% respectively. Followed by carbon and aluminium oxide nano. The optimum parameter with their levels for the highest modulus of elasticity was obtained at (0/90 fiber orientation, 5% carbon and 0% nano aluminium oxide). While the highest tensile strength and impact strength present with using (0/0 fiber orientation and 5% carbon). The experimental and expected results are very close, with an error ratio not exceeding 5%.en_US
dc.identifier.citationOwaid, A. A., Kaygusuz, H., & Mohammed, F. M. (2021, August). Effect of reinforcing materials on mechanical properties of composite material using Taguchi method. In Journal of Physics: Conference Series (Vol. 1973, No. 1, p. 012246). IOP Publishing.en_US
dc.identifier.scopus2-s2.0-85114206176
dc.identifier.scopusqualityN/A
dc.identifier.urihttps://hdl.handle.net/20.500.12939/2212
dc.indekslendigikaynakScopus
dc.institutionauthorOwaid, Anmar Abdulazeez
dc.institutionauthorKaygusuz, Hakan
dc.language.isoen
dc.publisherJournal of Physics: Conference Seriesen_US
dc.relation.ispartofIOP Publishing
dc.relation.isversionof10.1088/1742-6596/1973/1/012246en_US
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectTaguchi Methoden_US
dc.subjectReinforcingen_US
dc.titleEffect of reinforcing materials on mechanical properties of composite material using Taguchi method
dc.typeArticle

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
Effect of reinforcing materials on mechanical properties of composite material using Taguchi method pdf.pdf
Boyut:
418.25 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin/ Full Text
İndir
Lisans paketi
Listeleniyor 1 - 1 / 1
[ X ]
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu
Makine Mühendisliği Bölümü Koleksiyonu